DefeXtiles Teknik sa Paggawa ng Tela ni Jack Forman

Ang disenyo na DefeXtiles Teknik sa Paggawa ng Tela ni Jack Forman ay isang lubhang iginagalang na nagwagi ng napaka-prestihiyosong 2021 A' Design Award na Pilak sa Kategoryang Paligsahan na Disenyo ng Tekstil, Tela, Tekstura, Padron at Damit.

PilakTekstil· 2021

DefeXtiles Teknik sa Paggawa ng Tela

ni Jack Forman

Kliyente: Tangible Media Group, Mit Media Lab

Nagwagi ng A' Design Award na Pilak sa Kategoryang Tekstil

54,895

Na-verify na Nagwagi ng Parangal

I-verify ang Katayuan ng Parangal para sa #109724

Bisitahin ang Site Tingnan sa A' Design Award Press Release Badge ng Parangal

Mga Kulay

Ang Disenyo

Tungkol sa DefeXtiles Teknik sa Paggawa ng Tela

Ang DefeXtiles ay isang teknik sa paggawa ng tela na lumilikha ng manipis at flexible na mga tela gamit ang mga standard na 3D printer. Kinokontrol ng pamamaraang ito ang under-extrusion upang mabuo ang maliliit na globs na may mga pinong hibla sa pagitan ng mga ito. Ang nabuong pana-panahong mga puwang ay nagbibigay ng hitsurang habi, breathability, flexibility at stretch, kahit na sa matitigas na materyales tulad ng polylactic acid. Ang tela ay iniimprenta nang patayo sa print bed, kaya't maaaring makagawa ng pleated, kurbadong at komplikadong mga hugis. Kabilang sa mga aplikasyon ang mga kasuotan, tangible na interface at laruan.

Ang Pagkilala

Tungkol sa A' Design Award na Pilak

Ang DefeXtiles Teknik sa Paggawa ng Tela ay nagwagi ng A' Design Award na Pilak, isang pambihirang prestihiyosong pagkilalang iginagawad sa mga disenyong nasa pinakamataas na antas, nakabibighani at kahanga-hanga. Ang mga nagwagi ng Pilak ay mga likhang lubhang makinang at napakamalikhain na naglalarawan sa pambihirang kadalubhasaan, talento at talas ng isip ng kanilang mga tagapagdisenyo. Inaasahang ang DefeXtiles Teknik sa Paggawa ng Tela ay isang kahanga-hangang likhang huwaran na kapansin-pansing propesyonal at malalim na makabago. Ang disenyong ito na nagwagi ng A' Design Award na Pilak ay isang lubhang kapansin-pansin at hinahangaang imbensyon na nakikinabang at nagpapaunlad sa mga hangganan ng sining, agham, disenyo at teknolohiya. Ang DefeXtiles Teknik sa Paggawa ng Tela ay isang likhang labis na kinaiinggitan na gumigising ng mga hangarin, nagdadala ng positibong damdamin at nagpapasiklab ng pagkamangha at pagkabighani.

Sa Likod ng Disenyo

Press Kit

Mga kredito, miyembro ng koponan at teknikal na detalye na ibinigay ng taga-disenyo.

Mga Natatanging Katangian: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Mga Tag: textile, 3d print, lace, advanced manufacturing, fabric
Teknolohiya sa Produksyon: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Hamon sa Disenyo: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Pananaliksik: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Inspirasyon: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Tagal ng Proyekto: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Daloy ng Operasyon: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Mga Miyembro ng Koponan: Jack Forman
Mustafa Doga Dogan
Hamilton Foryseth
Hiroshi Ishii