Aida Sekkei Precut Pabrika ni Nobuaki Miyashita

Ang disenyo na Aida Sekkei Precut Pabrika ni Nobuaki Miyashita ay isang lubhang iginagalang na nagwagi ng napaka-prestihiyosong 2024 A' Design Award na Ginto sa Kategoryang Paligsahan na Disenyo ng Arkitektura, Gusali at Estruktura.

GintoArkitektura· 2024

Aida Sekkei Precut Pabrika

ni Nobuaki Miyashita

Kliyente: Aida Sekkei Co., Ltd.

Nagwagi ng A' Design Award na Ginto sa Kategoryang Arkitektura

150,107

Na-verify na Nagwagi ng Parangal

I-verify ang Katayuan ng Parangal para sa #160159

Bisitahin ang Site Tingnan sa A' Design Award Press Release Badge ng Parangal

Mga Kulay

Ang Disenyo

Tungkol sa Aida Sekkei Precut Pabrika

Ang bagong plano ng pabrika ng Aida Sekkei ay nakatuon sa precutting ng kahoy. Ang konsepto nito ay nakasentro sa paglikha ng arkitektura na sumasalamin sa serye ng pagproseso ng kahoy. Kasama nito ang isang lumulutang na daanan na nakapaligiran ng salamin na humigit-kumulang 100 metro ang haba sa loob ng pabrika, na dinisenyo para sa mga bisita upang malapit na maobserbahan ang buong proseso ng pre-cutting. Ang gusali ng opisina ay nagtatampok ng malalaking espasyo na may mga truss na gawa mula sa feather edge materials, na karaniwang ginagamit bilang sub-materials sa mga bahay na kahoy. Pinagsasama ng disenyo ang lahat ng elemento upang lumikha ng showcase factory, na binibigyang-diin ang visibility at aesthetic appeal sa bawat aspeto.

Ang Pagkilala

Tungkol sa A' Design Award na Ginto

Ang Aida Sekkei Precut Pabrika ay nagwagi ng A' Design Award na Ginto, isang napakaprestihiyosong pagkilalang iginagawad sa mga disenyong pangunahing-uri, kahanga-hanga at namumukod-tangi. Ang mga nagwagi ng Ginto ay mga likhang lubhang makabago, may pananaw at nakasisilaw sa karilagan na sumasalamin sa talino, karunungan at husay ng kanilang mga tagapagdisenyo. Inaasahang ang Aida Sekkei Precut Pabrika ay isang lubos na pinupuri, nagtatakda-ng-uso at monumental na imbensyon na naghahatid ng walang kapantay na halaga. Ang disenyong ito na nagwagi ng A' Design Award na Ginto ay isang kahanga-hanga at iginagalang na proyekto na lubos na nakikinabang at nagpapaunlad sa mga hangganan ng sining, agham, disenyo at teknolohiya. Ang Aida Sekkei Precut Pabrika ay lumilikha ng matinding damdamin ng pagnanais, gumigising ng damdamin, nagpapasigla ng pagkamalikhain at nakahuhumaling sa atin.

Sa Likod ng Disenyo

Press Kit

Mga kredito, miyembro ng koponan at teknikal na detalye na ibinigay ng taga-disenyo.

Mga Natatanging Katangian: This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
Mga Sukat at Packaging: Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2

Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden

Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2
Mga Tag: architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
Teknolohiya sa Produksyon: As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
Hamon sa Disenyo: When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
Pananaliksik: Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
Inspirasyon: Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
Tagal ng Proyekto: This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
Daloy ng Operasyon: This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
Mga Patent: None
Mga Credit ng Larawan: Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020