Obayashi Corporation tomonidan Oak Konan Shinagawa Ofis binosi

Obayashi Corporation tomonidan yaratilgan Oak Konan Shinagawa Ofis binosi — Arxitektura, Bino va Inshoot Dizayni tanlov toifasida nufuzli 2023 A' Design Award Kumush Mukofoti mukofotining yuqori baholangan g'olibidir.

KumushArxitektura· 2023

Oak Konan Shinagawa Ofis binosi

muallif: Obayashi Corporation

Mijoz: Obayashi-Shinseiwa Real Estate Corporation

Arxitektura toifasida A' Design Award Kumush Mukofoti g'olibi

17,399

Tasdiqlangan mukofot g'olibi

#149620 uchun mukofot holatini tasdiqlash

A' Design Award saytida ko'rish Press-reliz Mukofot nishoni

Ranglar

Dizayn

Oak Konan Shinagawa Ofis binosi haqida

Oak Konan Shinagawa — Yaponiyaning Tokio shahridagi port yaqinida joylashgan 12 qavatli ofis binosidir. Oq panjarasimon tashqi karkas oldindan quyilgan betondan yasalgan tashqi qobiq bo'lib, u ham konstruktiv karkas, ham quyoshdan himoya vositasi vazifasini bajaradi. Markaziy qismning po'lat konstruksiyasi bilan birgalikda ushbu gibrid konstruksiya ustunlarsiz ofis makonini yaratadi va moslashuvchan rejalashtirishga imkon beradi. Oldindan quyilgan ustunlar va to'sinlar qurilish maydonidan tashqarida ishlab chiqariladi hamda yuqoridan tushirilib o'z joyiga o'rnatiladi, bu esa qurilish maydonidagi ishlarni soddalashtiradi. Tashqi derazalar ajratib olinadigan dastak yordamida ochiladigan tabiiy shamollatish qurilmalari bilan jihozlangan.

Tan olinish

A' Design Award Kumush Mukofoti haqida

Oak Konan Shinagawa Ofis binosi A' Design Award Kumush Mukofotining g‘olibi bo‘lib, bu go‘zal, ulug‘vor va ta’sirchan eng yuqori darajadagi dizaynlarga beriladigan favqulodda nufuzli e’tirofdir. Kumush g‘oliblari o‘z dizaynerlarining ajoyib mahorati, iste’dodi va o‘tkirligini ko‘rsatuvchi juda yorqin va o‘ta ijodiy asarlardir. Oak Konan Shinagawa Ofis binosi ajoyib, namunaviy, diqqatga sazovor darajada kasbiy va chuqur innovatsion asar bo‘lishi kutiladi. A' Design Award Kumush Mukofotini qo‘lga kiritgan ushbu dizayn san’at, fan, dizayn va texnologiya chegaralarini kengaytiruvchi juda e’tiborga loyiq, tahsinga sazovor ixtirodir. Oak Konan Shinagawa Ofis binosi ko‘pchilik havas qiladigan, istaklarni uyg‘otadigan, ijobiy tuyg‘ular olib keladigan hamda hayrat va ajablanish uyg‘otadigan ijoddir.

Dizayn ortida

Press-kit

Dizayner tomonidan taqdim etilgan kreditlar, jamoa a'zolari va texnik tafsilotlar.

Noyob xususiyatlar: The building is a mid-rise, 12-story office building located near the harbor in Shinagawa, Tokyo.
The distinctive, white lattice-like exterior frame is an outer shell made of precast concrete serving as
structural frame as well as sun-shading device. Combined with the steel construction of the core this
hybrid structure creates a column-free office space. The fusion of structure and finishing enhances high
buildability and sustainability.
O'lchamlar va qadoqlash: [Site area] 2,635.57m2
[Building area] 1,485.79m2
[Total floor area] 16,331.64m2
[Number of floors] 12 floors above ground, 1 floor below ground, tower building 1st floor
[Maximum Height] 56.76m
[Structure] steel construction, reinforced concrete construction in some parts
Teglar: Structural Frame, Facade Design, High Added-Value, High Buildability, Equipment units, Office Interior, Tokyo
Ishlab chiqarish texnologiyasi: Supply and exhaust air for the office is provided on the east, west, north sides from equipment units (air supply
units and exhaust air units) built into the aluminum curtain wall inside the columns and beams.
By taking advantage of the depth (500mm) of the exterior shell structure and installing air intake and exhaust air
outlets on the same exterior wall surface, the amount of ductwork in the office ceiling was significantly reduced,
which also contributes to high buildability.
The deep structural frame also controls the amount of direct solar radiation and significantly reduces the heat loads.
Dizayn muammosi: Labor shortage in the Japanese Construction Industry is a major challenge.
Although research into new technologies such as construction robots is progressing, there are still few examples of their use in actual construction sites.
One of the major themes of this project is high buildability.
We communicated with the construction staff to find a construction method that was easy to construct and of high quality.
At the same time, as architects, we had to keep creating new ideas for exterior and interior to added-value to the client.
Tadqiqot: Labor shortage have recently become major challenges in the Japanese Construction Industry.
This building uses precast concrete columns and beams, which serve as both the structure and exterior finishing materials of the shell structure that characterizes the facade.The use of precast concrete elements fabricated off-site ensures high quality and accuracy.
In addition, the structural frame was designed without horizontal connection, which enables to simplify the site erection. Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
Ilhom: Labor shortage have recently become major challenges in the Japanese Construction Industry.
Structural frame was designed without horizontal connection, which enables to simplify the site erection.
Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
The design of the interior in many areas is based on a motif of vertical and
horizontal lines and grids inspired by the facade design.
Loyiha muddati: The project started in September 2020 and finished in July 2022 in Tokyo, Japan.
Ish jarayoni: The column-free office space with a hybrid structure of a precast concrete outer frame and steel construction improves the flexibility of office layout and significantly enhances the convenience of users.
In addition, the exterior windows have natural ventilation window units that can be opened and closed freely by attaching a detachable handle, allowing for direct air intake.
Jamoa a'zolari: Hiroshi Satake
Kenji Matsuoka
Rei Sato
Kazuhiro Yasufuku
Rasm mualliflari: Image #1: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #2: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #3: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #4: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #5: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022