Project Clipmouse Chuột Máy Tính Gập Được by Kevin Yang

Project Clipmouse Chuột Máy Tính Gập Được by Kevin Yang is a highly esteemed winner of the very prestigious 2026 A' Design Award Đồng in Thiết kế Máy tính Competition Category.

ĐồngMáy tính· 2026

Project Clipmouse Chuột Máy Tính Gập Được

by Kevin Yang

A' Design Award Đồng Winner in Máy tính Category

4,668

Verified Award Winner

Verify Award Status for #182448

View at A' Design Award Press Release Award Badge

Colors

The Design

About Project Clipmouse Chuột Máy Tính Gập Được

Dự án Clipmouse là một con chuột không dây gập được siêu mỏng, được thiết kế cho người dùng kiểu cầm bằng đầu ngón tay. Các cần bấm có thể gập lại giúp giảm chiều cao khi gập xuống còn 10 mm, trong khi hình dạng khi mở ra khôi phục lại dáng chuột quen thuộc. Cơ chế nghiêng dịch chuyển với cam hình giọt nước và ống trượt lò xo tái tạo hành trình phím và phản hồi sắc nét của các vi công tắc thông thường. Hai bảng mạch xếp chồng lên nhau được kết nối bằng mạch in dẻo giúp phần bên trong luôn gọn gàng. Vỏ trong suốt cho phép nhìn thấy cấu trúc bên trong, và các bộ phận nhỏ quan trọng có thể được thay thế.

The Recognition

About the A' Design Award Đồng

Project Clipmouse Chuột Máy Tính Gập Được là người chiến thắng giải thưởng A' Design Award Đồng, một sự công nhận vô cùng danh giá dành cho các thiết kế xuất sắc nổi bật về sự sáng tạo, tài khéo léo và sự sắc sảo. Những người chiến thắng giải Đồng là những hiện vật rất điêu luyện và sáng tạo ấn tượng, xác thực kinh nghiệm phong phú, trí tưởng tượng và sự tháo vát của các nhà thiết kế. Project Clipmouse Chuột Máy Tính Gập Được được kỳ vọng là một vật phẩm được đánh giá cao, ngưỡng mộ và trân trọng, chuyên nghiệp và đổi mới đáng chú ý. Thiết kế chiến thắng giải thưởng A' Design Award Đồng này tích hợp các thực hành tốt nhất trong nghệ thuật, khoa học, thiết kế và công nghệ, và xuất sắc nhờ sự chú ý đến chi tiết. Project Clipmouse Chuột Máy Tính Gập Được thỏa mãn nhu cầu một cách tuyệt vời, chạm đến ham muốn, làm say mê cảm xúc và thu hút sự tò mò.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Project Clipmouse is an ultra-slim, lightweight tri-mode wireless mouse engineered around a proprietary tilt‑shift mechanism, for which patent applications are currently pending.

Designed specifically for fingertip grip users, it represents a new exploration in foldable mouse design: its collapsible left and right trigger panels compress the overall profile to a mere 1 cm in its folded state.

Its click actuation system is built upon the same proprietary tilt‑shift architecture, utilizing a teardrop‑shaped cam and spring‑loaded sliding sleeve to faithfully reproduce the key travel and crisp tactile feedback characteristic of conventional microswitches.
Dimensions & Packaging: When Folded: 60mm (W) x 75mm (L) x 10mm (H)
When Expand: 60mm (W) x 75mm (L) x 28mm (H)

Apx Min. Trigger force: (65 Plus and Minus 15 gf)
Maximum trigger arm angle: 0 - 130 Degrees
Tags: Mouse, Portable, CLIPMOUSE, Everyday Carry
Production Technology: The design integrates core components: nRF52810 (QFAA package, miniaturized for space efficiency) and PMW3360DM (compact 16-PDIP package) to deliver superior hardware performance within extreme constraints.

A stacked dual-PCB assembly is used in design - main HDI PCB hosts nRF52810/PMW3360DM, auxiliary PCB accommodates IC touch sensor to mimic the scroll wheel - interconnected via FPC for compact, reliable signal transmission.

The PCBA design is targeted to miniaturize PCB with minimal component packaging, optimizes space utilization. Components are mainly injection molded and a transparent housing showcase the exposed PCBA (refined trace routing, compact packaging) as a CMF visual element.

Omron orange series microswitches (60gf +- 10gf actuation force) ensure crisp feedback; standard replaceable bearings and springs enhance maintainability.

Project Clipmouse merges miniaturized components, FPC-connected stacked PCBs, and visible PCBA, balancing performance, space efficiency, and industrial aesthetics via injection molding and transparent enclosure design.
Design Challenge: The hardest part of Project CLIPMOUSE was addressing three core challenges, with high-speed circuit stability being the most intractable.

First, optimizing microswitch placement for the slim, angled trigger design was solved by a newly developed tilt-shift trigger system: a cam gear on the rotating axis pushes a spring-loaded slide bar, converting rotational force into direct force to actuate the switch, reducing friction and ensuring consistent reset.

Second, fitting all components into an extremely compact space was overcome through multiple analog circuit tests and selecting/testing minimal component packages.

The partially resolved challenge is high-speed circuit stability: as a non-professional in high-speed circuit design, strict adherence to routing specifications and partial auto-routing still led to interference in the ultra-compact space.

Prototypes are usable aesthetically refined, but commercial-level anti-interference requires professional packet transmission and layout - needing expertise in high-speed circuit design and software engineering. (Most branded tri-mode mouse have its own packet and de-pack system to avoid channel interference)

External factors (such as limited professional knowledge, compact space constraints) and internal factors (personal design capability limits) posed key obstacles, while production possibilities are confirmed via prototypes, Project Clipmouse still needs professional refinements to truly be ready for market.
Research: Research Objectives: To design an ultra-thin foldable mouse (CLIPMOUSE) balancing portability, ergonomics and hardware performance; confirm optimal length, width, height and trigger arm angle via ergonomic verification; optimize PCBA layout under space constraints; and ensure ideal actuation force.

Methodology: Iterative design research, combining ergonomic testing, hardware design reference, 3D-printed prototype validation, and microswitch selection testing to continuously adjust and optimize the product.

Data Collection and Tools: Ergonomic data via angle measuring tools and user experience; PCBA design referenced Nordic Semiconductor’s design manual, assisted by PCB layout software (JLCEDA & Easy Routing); 3D printing used for prototype validation; microswitch testing for actuation force.

Participants/Experiments: Tested 3D-printed prototypes with different sizes/trigger angles; 23 microswitch types from various manufacturers were tested to confirm optimal actuation force; PCBA performance verified against Nordic’s specifications(Design based on their recommended minimal MCU system).

Results: Optimal dimensions and trigger angle confirmed; 3D printing ensured prototype feasibility; 1 optimal microswitch (Omron orange, 60gf) selected; stacked dual-PCB (FPC-connected) optimized via Nordic’s manual.

Insights/Impacts: 3D printing accelerates prototype validation; diverse microswitch testing ensures user comfort; professional manuals boost design stability; portability and ergonomics can be balanced.

Each and every validation process meets mobile office needs, and servicing for foldable peripheral innovation, and provides a balance between portability, comfort and performance.
Inspiration: Inspiration for Clipmouse derives directly from its name: an abstract reinterpretation of the mousetrap mechanism. Driven by the mechanical clarity and instantaneous actuation of such structures, the design translates this operational logic into an ultra-thin, portable mouse.

Consistent with the core design philosophy, CMF and functional components contribute to the visual narrative. The PCB architecture and proprietary tilt-shift mechanism are intentionally exposed, rather than concealed as internal infrastructure.
Project Duration: The project started in October 2025 in Bangkok, passed Proof of Concept (PoC) in January 2026, and final validating prototype in March 2026. Currently undergoing patent process in china.
Operation Flow: This mouse is unique but natural to operate - simply unfold and expand the trigger arms to use it, and the operation is straightforward. It can be folded into a compact size, making it easy to carry around; when unfolded, it restores to a normal mouse shape that fits daily use.

The key part is that it can be folded to save space, while keeping the ergonomics almost the same as a normal mouse. Its transparent shell lets you see the internal structure clearly.

Its click mechanism responds smoothly to light fingertip pressure, giving a firm, satisfying feel with every press, and key small components can be easily replaced if needed.

It is a great alternative for a thinner, lighter, and more portable mouse experience - fitting in pockets or small bags just like a mini pack of cigarettes.
Patents: Currently undergoing patent process in china.