Uyilo olubizwa ngokuba yi-Arch Isihlalo, Isihlalo Esingenamqolo olwenziwe ngu-Edvard Glazebrook ngumwini obekekileyo webhaso elinobukhazikhazi le-2021 Ibhaso Lebhronzi le-A' Design Award Kudidi Lokhuphiswano lwe-Uyilo lweFanitshala.
IbhronziIfanitshala· 2021
Arch Isihlalo, Isihlalo Esingenamqolo
Umwini we-Ibhaso Lebhronzi le-A' Design Award Kudidi Lwe-Ifanitshala
Umwini Webhaso Oqinisekisiweyo
Qinisekisa Isimo Sebhaso se-#106853Uyilo
Malunga ne-Arch Isihlalo, Isihlalo Esingenamqolo
I-Arch sisihlalo kunye nesitulo esingenamqolo esenziwe ngokhuni lwe-pine oluqingqiweyo nolucwangcisiweyo ngombala omnyama. Uyilo lusekelwe kwiindlela nemifanekiso elula neziphindaphindwayo, ezinika impahla yendlu imbonakalo efanayo neyengqiqo. Ii-arch ezintlanu ezifanayo zenza imilenze kunye nomqolo wesihlalo, ngelixa isitulo esingenamqolo senziwe ngeenxalenye ezintathu ezingange-arch ezidibana embindini. Zonke iinxalenye zisikwe kwipleyiti yokhuni oluqinisiweyo ngomatshini we-CNC router, emva koko zincanyathiselwa kwaye zidityaniswe ngeepini zokhuni. Amagophe omeleza le mpahla kwiindawo zayo ezibuthathaka kunazo zonke.
Ukuqatshelwa
Malunga ne-Ibhaso Lebhronzi le-A' Design Award
Arch Isihlalo, Isihlalo Esingenamqolo ngumphumeleli weIbhaso Lebhronzi le-A' Design Award, ukuqatshelwa okuhlonitshwayo kakhulu okunikwa imiyilo ephawulekayo eyahlukaniswa kukuyila, ubukrelekrele nobukrelekrele. Abaphumeleleyo beBhronzi ziimveliso ezinobuchule obukhulu nezidala ngokumangalisayo ezingqina amava aphangaleleyo, ukucinga nokwazi ukuzenzela kwabayili bazo. Arch Isihlalo, Isihlalo Esingenamqolo iyathenjwa ukuba ibe yimpahla exatyiswa kakhulu, edunyiswayo nethandwayo enobungcali obuphawulekayo nezinto ezintsha. Lo myilo uphumeleleyo weIbhaso Lebhronzi le-A' Design Award ubandakanya iindlela ezilungileyo kakhulu kubugcisa, inzululwazi, uyilo kunye nobuchwephesha kwaye ugqwesile ngenxa yokunikela ingqalelo kwiinkcukacha. Arch Isihlalo, Isihlalo Esingenamqolo iyanelisa iimfuno ngokumangalisayo, ichukumisa iinqwenelo, ikhwebela iimvakalelo kwaye itsala umdla.
Emva Koyilo
Ikhithi Yeendaba
Iziqinisekiso, amalungu eqela kunye neenkcukacha zobugcisa ezinikezelwe ngumyili.
- Iimpawu Ezizodwa
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Imilinganiselo nePakishini
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Iithegi
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Ubuchwepheshe Bokuvelisa
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Umngeni Woyilo
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Uphando
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Inkuthazo
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Ubude Beprojekthi
- The project started in march 2020 - and finished in late May 2020.
- Ukuhamba Komsebenzi
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Iipathenti
- Copyrights belong to Edvard Glazebrook, 2020
- Amalungu Eqela
- Edvard Glazebrook
Okuxhasiweyo
Hlola Ngaphaya kwe-Designers.org
Fumana iimveliso, iinkonzo kunye namathuba avela kumaqabane ethu entengiso.
Okungakumbi Ongakuphonononga
Oyilo Ezinxulumeneyo
Phonononga ezinye izinto zoyilo eziwongwe ngembasa kweli candelo linye, ezikhethwe ngokwemfanelo.
