Solarbreaker Ìdí Iṣẹ́ Àkọ́kọ́: Fèrèsé Ìdènà Iná Òòrùn Fóto-fóltáíìkì láti ọwọ́ Jaroslaw Markowicz

Solarbreaker Ìdí Iṣẹ́ Àkọ́kọ́: Fèrèsé Ìdènà Iná Òòrùn Fóto-fóltáíìkì láti ọwọ́ Jaroslaw Markowicz jẹ́ aṣẹ́gun olókìkí púpọ̀ ti 2020 Àmì-ẹ̀yẹ Fàdákà A' Design Award nínú Ẹ̀ka Ìdíje Àpẹẹrẹ Ohun-èlò Ìkọ́lé àti Ẹ̀ka Ìmọ́lé.

FàdákàẸ̀ka Ìkọ́lé· 2020

Solarbreaker Ìdí Iṣẹ́ Àkọ́kọ́: Fèrèsé Ìdènà Iná Òòrùn Fóto-fóltáíìkì

látọ̀wọ́ Jaroslaw Markowicz

Oníbàárà: Phoenix Enterprise

Aṣẹ́gun Àmì-ẹ̀yẹ Fàdákà A' Design Award nínú Ẹ̀ka Ẹ̀ka Ìkọ́lé

33,796

Aṣẹ́gun Àmì Ẹ̀yẹ Tí a Jẹ́rìísí

Jẹ́rìísí Ipò Àmì Ẹ̀yẹ fún #102697

Wo ní A' Design Award Ìwé Ìròyìn Àmì Ẹ̀yẹ

Àwọ̀

Àpẹrẹ Náà

Nípa Solarbreaker Ìdí Iṣẹ́ Àkọ́kọ́: Fèrèsé Ìdènà Iná Òòrùn Fóto-fóltáíìkì

Solarbreaker jẹ́ fèrèsé ìdènà iná òòrùn fóto-fóltáíìkì tí ó ń sọ àwọn ojú ilé di ohun tí ń mú agbára jáde. Ètò náà dá lórí àwọn profáìlì aluminium tí a tú jáde, tí a fi gbé àwọn pánẹ́ẹ̀lì oòrùn ró. Ọ̀kọ̀ọ̀kan pánẹ́ẹ̀lì náà ni a tẹ̀ ní ìwọ̀n ogójì-dín-márùn-ún ìwọ̀n láti mú kí ó lágbára sí i, module kan tí ó jẹ́ mítà oníọ̀nà kan lè fún bọ́ọ̀bù LED mẹ́rìndínlógún ní agbára. Ìṣàkópọ̀ rẹ̀ kì í béèrè fún ohun èlò kankan díẹ̀, nítorí a gbé àwọn profáìlì náà sórí ìdí gbígbé wọn, wọ́n sì há mọ́ ara wọn nípasẹ̀ ìwúwo ara wọn fúnra rẹ̀. A fi àwọn okùn pamọ́ nínú àwọn profáìlì. Yàtọ̀ sí àwọn ojú ilé, àwọn ohun kan náà lè ṣe ọgbà, ìdènà àti fèrèsé ìdènà iná.

Ìdánimọ̀ Náà

Nípa Àmì-ẹ̀yẹ Fàdákà A' Design Award

Solarbreaker Ìdí Iṣẹ́ Àkọ́kọ́: Fèrèsé Ìdènà Iná Òòrùn Fóto-fóltáíìkì jẹ́ olùborí Àmì-ẹ̀yẹ Fàdákà A' Design Award, ìdánimọ̀ onípọ̀nlé lọ́nà àrà ọ̀tọ̀ tí a fún àwọn àwòṣe ìpele gíga jùlọ tó dára tó sì ń kan ọkàn. Àwọn olùborí Fàdákà jẹ́ àwọn iṣẹ́ tó ń tàn yòò gidigidi tó sì ní ìṣẹ̀dá púpọ̀ tí wọ́n ń ṣàfihàn ìmọ̀ ìjìnlẹ̀, ẹ̀bùn àti ìmọ̀ràn àwọn olùṣàwòṣe wọn. A retí pé Solarbreaker Ìdí Iṣẹ́ Àkọ́kọ́: Fèrèsé Ìdènà Iná Òòrùn Fóto-fóltáíìkì yóò jẹ́ iṣẹ́ àgbàyanu, àpẹẹrẹ rere, ti ọ̀jáfáfá lọ́nà tó ṣe pàtàkì tó sì ní ìmúṣẹ̀dá tuntun jinlẹ̀. Àwòṣe tó borí Àmì-ẹ̀yẹ Fàdákà A' Design Award yìí jẹ́ ohun ìmúṣẹ̀dá tó hàn gbangba gidigidi tí a mọrírì tó ń ṣe anfàní tó sì ń tì ààlà iṣẹ́ ọnà, sáyẹ́ǹsì, àwòṣe àti ìmọ̀-ẹ̀rọ síwájú. Solarbreaker Ìdí Iṣẹ́ Àkọ́kọ́: Fèrèsé Ìdènà Iná Òòrùn Fóto-fóltáíìkì jẹ́ ẹ̀dá tí ọ̀pọ̀lọpọ̀ ń ṣe ìlara, tó ń jí ìfẹ́ inú, tó ń mú ìmọ̀lára rere wá tó sì ń jí ìyàlẹ́nu àti ìyanu.

Lẹ́yìn Àpẹrẹ Náà

Àkójọ Ìròyìn

Àwọn ẹ̀tọ́, àwọn ọmọ ẹgbẹ́ àti àlàyé ìmọ̀ ẹ̀rọ tí olùṣàpẹrẹ pèsè.

Àwọn Ohun Àkànṣe: Our solutions make photovoltaics an integral part of the building. Solarbreaker products make possible to use the entire building facade for energy production without disturbing its aesthetics. The system has been developed to give the greatest configuration options in the simplest possible form. The main application of Solarbreaker are building facades, however, using the flexible capabilities of the system we can build barriers, fences, window blinds or free-standing blinds from it.
Ìwọ̀n àti Àpò: Basic module dimensions 1000mm x 120 mm x 1000mm
Àwọn Àkọlé: Solar panels, photovoltaic, facade shutter, architecture, fence
Ìmọ̀-ẹ̀rọ Ìṣelọ́pọ̀: The solarbreaker design is based on extruded profiles. Solar panels are mounted on the main profile. This method of assembly allows to easily separate materials so that the product can be recycled. The solution has been designed to be easy to install. Extruded profiles fold like lego blocks and allow for wide arrangement possibilities.
Ìpèníjà Àpèsè: The biggest challenge of the project was to create a product that would retain its lightness despite the internal electronics and photovoltaic panel
Ìwádìí: The main research was to develop a product which can be adapted to almost any building. This required extensive analysis of the various buildings and their constructions. These studies have resulted in a design that is very easy to assemble. The first tests were made on 3D printed models. The wing loads were tested many times, which allowed the development of aluminium profiles with the required parameters.
Ìmísí: The main inspiration for the product was the sun protection solutions existing on the market. Large glazed facades, unfortunately, make the rooms get very hot, the sun from the south can be a problem, however, we wanted to turn this disadvantage into an advantage. Solarbreaker allows to use almost the entire building for electricity production and at the same time protect it from the sun.
Àkókò Iṣẹ́ Àkànṣe: the project was developed in Warsaw. Conceptual work lasted from november 2018. After many prototypes and tests, the project was finally implemented in January 2020.
Ìlànà Ìṣiṣẹ́: Connecting profiles and building structures requires almost no tools. The structure is built directly on site from components. Finished profiles with photovoltaic panel just need to be put on the mounting and pressed - under the pressure of weight the element will lock. Solarbreaker is equipped with the elements necessary to connect it to the home power grid. Cable connections are hide inside the profiles, therefore the solution is durable and resistant to weather conditions. The 1m2 module will produce enough energy to power sixteen LED bulbs (80wat in total). Each panel is tilted at an angle of 45 degrees, which ensures the highest efficiency.
Àwọn Ọmọ Ẹgbẹ́: Jarosław Markowicz, Daniel Ziomek