由設計師 Mohamad Montazeri 創作嘅 Aurora 合成器係備受推崇嘅 2021 A' Design Award 銅獎得獎作品，獲獎類別為樂器設計。

銅樂器· 2021

Aurora 合成器

由 Mohamad Montazeri

客戶: Arena Design Academy

樂器類別嘅 A' Design Award 銅獎得獎者

41,062

經驗證嘅獲獎者

驗證設計 #124936 嘅獲獎狀態

喺 A' Design Award 查看新聞稿獎項徽章

色彩

設計

關於 Aurora 合成器

Aurora係一款合成器,利用綠色激光束嚟控制音效同濾波器。呢道激光取代咗好多同類樂器上面所用嘅觸控板同滑桿。演奏者用手打斷激光束,透過改變光束長度嚟調節所選音效嘅頻率。機身配備多點觸控屏幕,顯示設定同狀態,並提供虛擬鍵盤供演奏之用。旋鈕、滑桿同按鈕分別控制振盪器、濾波器、放大器同調變區段。機身以ABS塑膠注塑成型製造。

榮譽認可

關於A' Design Award 銅獎

Aurora 合成器是 A' Design Award 銅獎得主，這是授予以創造力、獨創性和敏銳見長的傑出設計的極具聲望的認可。銅獎得主是技藝嫻熟、創意驚人的作品，印證了其設計師豐富的經驗、想像力與機智。預計Aurora 合成器將成為一件備受推崇、令人欽佩且被珍愛的物品，兼具顯著的專業性與創新性。這件贏得 A' Design Award 銅獎的設計融入藝術、科學、設計和技術領域的最佳實踐，並因注重細節而出類拔萃。Aurora 合成器出色地滿足需求，觸動渴望，迷住情感，並吸引好奇心。

設計背後

新聞資料包

由設計師提供嘅製作人員名單、團隊成員同技術詳情。

獨特屬性: In this synthesizer, a laser is used to control the effects and filters. In fact, this creative method has replaced touchpads and sliders to control sound effects. In addition to increasing the ease of use and speeding up the composer's action, this laser is attractive and has a visual beauty for audience and composer during a performance. An enjoyable and different experience while performing or composing. Aurora also has a touch screen for easier settings and status display for the composer.
尺寸同包裝: Dimensions: 380 x 340 x 48 mm
Weight: 2.7 kg

TECHNICAL PROPERTIES:
EFFECTS: Bit Crash, Fuzz, DIST, Pitch Shifter, PHASER, FLANGER, Tempo sync, Panning Delay, DELAY, LOW BOOST, Reverb, Knobs: Control 1, Control 2

OSC SECTION:
Oscillator Waveform: SAW, SQUARE, PULSE/PWM, TRIANGLE, SINE, NOISE, SUPER SAW
Knobs: PITCH, DETUNE, Envelope
Sliders: Pulse Width, Pulse Width Modulation,
Envelope: Slider: Attack, Decay

AMP:
Knob: Level
Envelope: Slider: Attack, Decay, Sustain, Release

FILTER SECTION:
Filter Type: LPF, HPF, BPF, PKG (-12 dB/-24 dB)
Knobs: CUTOFF, KEY FOLLOW, RESONANCE, ENVELOPE
Envelope: Slider: Attack, Decay, Sustain, Release

LFO SECTION:
LFO Shapes: TRIANGLE, SINE, SAW, SQUARE, Sample
Knobs: PITCH, FILTER, AMP, FADE TIME, RATE

OTHER:
OUTPUT SECTION: Knob: Volume
EXIT IN SECTION: Knob: Level, Buttons: ON, TYPE
LASER SECTION: Buttons: Laser 1, Laser 2, Shift
TONS SECTIONS: Buttons: Tone (1-6), Switch, Tone Copy
Phrase Recorder: User: 8, Number of Track: 1
Sound Generator Section
Display: Touchscreen LCD

PORTS:
Micro SD Reader
USB: USB A-Type, USB B-Type, USB C-Type,
MIDI: Thru, Out, In
OUTPUTS: R port, L/Mono port
INPUTS: R port, L/Mono port
MIX IN, Sync
標籤: Aurora, Synthesizer, Synth, Musical Instrument, Electronic music, Electronic Instrument, musical user interface, electronic musical instrument,
生產技術: The body of the product is made of ABS plastic by injection molding method. The laser is produced by a generator. The laser is directed to the beam for the composer to access. The length of the laser beam is set with the frequency of each sound by a processor, and as the length is reduced by the composer's hand, the frequency of the sound set with it also changes. The screen is multi-touch and allows you to play the digital keyboard.
設計挑戰: The main challenge is to upgrade the product to increase the quality of composing more easily and quickly. Using laser technology and instantaneous processing of its length for use in the product. Setting laser beam with sound indicators to control effects and sound filters for sound generation and electronic composition.
研究: Most of the research part of this project is about matching a set of quantitative data with another set of continuous quantitative data. The process that helps to use the laser and match the quantitative characteristics of the sound with the length of the laser beam.
靈感: Aurora is a synthesizer. This synthesizer uses a green laser to control effects and sound filters. This green light is reminiscent of the bright rays of the aurora borealis in the dark of the night. The name of this product is derived from this natural phenomenon. Aurora is an innovation in the world of electronic music that can create a different experience for a composer while performing.
項目時長: Project duration was about 24 months: 2019/2021
操作流程: Aurora is an electronic musical instrument that, like all synthesizers, generates audio signals. But the way it works is more attractive. At the head of the Aurora, there is a laser beam that is automatically set with the sound of the section. You can change the type of sound by placing your hand in the path of the laser light and interrupting the path and increasing or decreasing the length of this laser beam. By pressing the laser buttons 1 or 2, you can copy the type of effect or filter you want to control by the laser. The shift button also allows this to be done instantly. On the other part of the Aurora, there are knobs, sliders and buttons of oscillators, effects, filters, AMP, LFO and other adjustment buttons for tuning and composing. Some settings are also available digitally by touching the touchscreen. The screen is multi-touch so you can easily and professionally use the virtual keyboard displayed on it.
圖片來源: Image #1 : Creator Mohamad Montazeri, Aurora, 2021.
Image #2 : Creator Mohamad Montazeri, Aurora, 2021.
Image #3 : Creator Mohamad Montazeri, Aurora, 2021.
Image #4 : Creator Mohamad Montazeri, Aurora, 2021.
Image #5 : Creator Mohamad Montazeri, Aurora, 2021.