Zinariya Gine-gine · 2024
Aida Sekkei Precut Masana'anta
- Kyautar A' Design Award ta Zinariya 2024 in Gine-gine
- CLIENT: Aida Sekkei Co., Ltd.
- Estimated Number of Design Views: 148,971
- Verification code 60275D61D5 · Verify this award
Colors
About Aida Sekkei Precut Masana'anta
Sabuwar tsarin masana'antar Aida Sekkei ya mai da hankali kan yankan katako kafin amfani. Manufarsa ta ƙunshi ƙirƙirar gine-gine wanda ke wakiltar jerin ayyukan sarrafa katako. Ya haɗa da hanyar tafiya mai shawagi da aka lulluɓe da gilashi mai tsawon kusan mita 100 a cikin masana'antar, wanda aka ƙera don baƙi su kalli dukan tsarin yankan sosai. Ginin ofishin yana da manyan filaye tare da tsarin ginshiƙai da aka yi daga kayan gini masu gefen da aka gyara, waɗanda ake amfani da su sosai azaman kayan gini na ƙasa a cikin gidajen katako. Ƙirar ta haɗa dukkan abubuwa don ƙirƙirar masana'anta mai nuna fasaha, tare da mai da hankali kan bayyane da kyawawan fasaha a kowane bangare.
About the Kyautar A' Design Award ta Zinariya
Zanen Aida Sekkei Precut Masana'anta ya lashe Kyautar A' Design Award ta Zinariya, wata karramawa mai matuƙar daraja da ake bai wa zane-zane na matakin farko, masu ban mamaki kuma na musamman. Waɗanda suka lashe kyautar Zinariya ƙirƙire-ƙirƙire ne masu sababbin abubuwa sosai, masu hangen nesa kuma masu haske mai ban sha'awa waɗanda ke nuna hazaƙa, hikima da ƙwarewar masu zanensu. Ana sa ran zanen Aida Sekkei Precut Masana'anta ya zama ƙirƙira mai yabo sosai, mai kafa yanayi kuma babba wacce ke kawo ƙima da ba a taɓa ganin irinta ba. Wannan zane da ya lashe Kyautar A' Design Award ta Zinariya aiki ne mai ban mamaki, mai daraja wanda ke amfanar fasaha, kimiyya, zane da fasahar zamani sosai kuma yana kai iyakokinsu gaba. Zanen Aida Sekkei Precut Masana'anta yana haifar da tsananin sha'awa, yana tada soyayya ga aiki, yana ƙarfafa ƙirƙira kuma yana burge mu.
Press Kit
- Unique Properties
- This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
- Dimensions & Packaging
- Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2
Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden
Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2 - Tags
- architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
- Production Technology
- As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
- Design Challenge
- When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
- Research
- Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
- Inspiration
- Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
- Project Duration
- This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
- Operation Flow
- This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
- Patents
- None
- Image Credits
- Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020
