Hydrospine Saborra Freediving minn Ludovic Lahccen and Raoul Morel

Id-disinn Hydrospine Saborra Freediving minn Ludovic Lahccen and Raoul Morel huwa rebbieħ stmat ħafna tal-prestiġjuż 2023 Premju A' Design Award tal-Fidda fil-Kategorija tal-Kompetizzjoni ta' Disinn ta' Oġġetti Sportivi, Fitness u Tagħmir tar-Rikreazzjoni.

FiddaOġġetti Sportivi· 2023

Hydrospine Saborra Freediving

minn Ludovic Lahccen and Raoul Morel

Klijent: Apnea Sub

Rebbieħ tal-Premju A' Design Award tal-Fidda fil-Kategorija ta' Oġġetti Sportivi

756,911

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #148412

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Hydrospine Saborra Freediving

Sistema ta 'piż tad-dahar għall-freediving, li tippermetti bilanċ u galleġġjenza ultra preċiżi. L-assi tagħha, il-kapaċità ta 'tagħbija modulari u veloċi tagħha, sa 6 kg, li jistgħu jintużaw fi kwalunkwe pożizzjoni, kwalunkwe dixxiplina ta' l-għaddasa. Hija mgħammra b'rilaxx ta 'malajr u bokkli ta' aġġustament biex taġġusta għal daqsijiet differenti, ikun xi jkun is-sess, li toffri kumdità inkredibbli li malajr tagħmlek tinsa l-piż li jinġarr. Id-disinn tiegħu ġej mill-fużjoni ta 'annimali tal-baħar u tagħmir maħluqa għall-veloċità biex tagħtiha linji idrodinamiċi ħafna u toffri l-aħjar glide taħt l-ilma. Il-versatilità tagħha tagħmilha kunċett uniku

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Fidda

Hydrospine Saborra Freediving huwa rebbieħ tal-Premju A' Design Award tal-Fidda, rikonoxximent prestiġjuż straordinarjament mogħti lil disinji tal-ogħla livell, sbieħ u impressjonanti. Ir-rebbieħa tal-Fidda huma xogħlijiet brillanti ħafna u kreattivi ħafna li juru l-għarfien espert, it-talent u l-aċċuratezza tad-disinjaturi tagħhom. Huwa mistenni li Hydrospine Saborra Freediving ikun xogħol mill-isbaħ, eżemplari, professjonali ħafna u innovattiv bil-fond. Dan id-disinn rebbieħ tal-Fidda huwa invenzjoni notevoli u mammirata li tikkontribwixxi biex jitwessgħu l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. Hydrospine Saborra Freediving huwa ħolqien li ħafna jinvidjawh, li jqajjem ix-xewqat, iġib sentimenti pożittivi u joħloq tgħaġġib u mistagħġib.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Dimensjonijiet u Ippakkjar: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Tikketti: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Teknoloġija tal-Produzzjoni: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Sfida tad-Disinn: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Riċerka: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Ispirazzjoni: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Tul tal-Proġett: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Fluss tal-Operazzjoni: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Privattivi: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Membri tat-Tim: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Krediti tal-Immaġni: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel