Dundas Square Barbers Ka Hare ho Sebaka sa ho Kuta Beoya by Nivek Remas

Dundas Square Barbers Ka Hare ho Sebaka sa ho Kuta Beoya by Nivek Remas is a highly esteemed winner of the very prestigious 2021 Moputso oa Tšepe oa A' Design Award in Moralo wa Sebaka sa Ka Hare le Dipontsho Competition Category.

TšepeKa Hare· 2021

Dundas Square Barbers Ka Hare ho Sebaka sa ho Kuta Beoya

by Nivek Remas

Moputso oa Tšepe oa A' Design Award Winner in Ka Hare Category

24,697

Verified Award Winner

Verify Award Status for #119896

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Dundas Square Barbers Ka Hare ho Sebaka sa ho Kuta Beoya

Taba ea Buka: Dundas Square Barbers ke sebaka sa ka hare sa ho kuta beoya se fumanehang Dundas Square, Toronto, Canada. Moralo ona o hlalosa bocha lintlha tsa setso tsa lebenkele la ho kuta beoya ka har'a sebaka se nyane sa lifiti tse 850 tsa skoere. Kaha sebaka sena se ne se sa lumelle mokhoa oa setso oa ho beha meaho lerakong, ho ile ha sebelisoa meaho e etsitsoeng ka thata e bobebe (light foam core) e behiloeng marulelong le ka holimo ho lerako la mahareng (dado). Fatše ho na le mokhoa oa meqolo e phatlalatsang ho tsoa hare, o hopotsang meqolo ea 'pole' ea setso ea ho kuta beoya. Libaka tsa mosebetsi tse phaphametseng li beiloe li potapotile litšiea tsa seipone. Menyako ea liipone e nang le mebala e fetohang butle (ombre) hammoho le seaparo sa lerako li atolosa pono ho feta kamore e ka sehloohong.

The Recognition

About the Moputso oa Tšepe oa A' Design Award

Dundas Square Barbers Ka Hare ho Sebaka sa ho Kuta Beoya ke mohapi oa Moputso oa Tšepe oa A' Design Award, kananelo e hlomphehang e fuoang meralo e metle e finyellang litlhoko tsa porofeshenale le tsa indasteri tse lebelletsoeng ho lintho tse hlahisitsoeng tse entsoeng hantle. Bahapi ba Tšepe ba bontša bokhoni bo boholo, bokhethehi bo phahameng, kutloisiso ea litsebi le bokhoni ba boqapi ba baqapi ba bona. Dundas Square Barbers Ka Hare ho Sebaka sa ho Kuta Beoya e lebelletsoe ho ba ntho e hlahisitsoeng e hlomphuoang haholo, e ratoang le e ratehang, e sebetsang le e nang le mehopolo e mecha. Moralo ona o hapileng Moputso oa Tšepe oa A' Design Award o kenyelletsa mekhoa e metle ka ho fetesisa ea indasteri mme o na le litšobotsi tsa theknoloji tse nang le bokhoni tse amanang le tsebo le talenta. Ka lebaka la botlalo ba eona, Dundas Square Barbers Ka Hare ho Sebaka sa ho Kuta Beoya e tšoanelehela tlhompho mme e entsoe ho fana ka ntlafatso ea bophelo e thusang ho etsa hore lefatše le be sebaka se molemo.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Spilling directly onto Toronto’s Dundas Square, this unique and highly coveted location was acquired by our client to build the dream barbershop he always imagined of having since the beginning of his career.

The client was particularly drawn towards a more classic barber shop with heavy molding and historical renovated projects. Because the site didn’t allow for traditional applications of molding, NR was challenged to reimagine the molding design on the ceiling and upper dado in the main space rather than the walls. The client also wanted a memorable flooring design that could be seen from across Dundas Square. Using the mirror columns as a base-point, a radial pattern was created as a reference to the classic barber pole stripes.

Studying numerous barber shop precedents with static stations around the perimeter, NR created floating stations around mirror columns to create a more dynamic environment. As the space was only 850 sq.ft, ombre mirror and wall covering was utilized for the back room and archways to draw the user’s eye beyond the main space and visually enlarge and layer upon the design of the main room.
Dimensions & Packaging: Ombre mirror archways; size: 3275h x 1650w x 12mm thick.
moulding; 350mm x 3000mm L pieces; 3 types of moulding profiles; EPS foam core construction, mesh layer, plaster/concrete with paint finish.
Metal archways - 6mm thk. SS metal, 3 pieces buttjoint, pressure fit with construction adhesive.
Kevin Chan
Samer Shaath
Production Technology: Ceiling & upper dado mouldings - traditional moulding of particle board substrate proved to be too heavy and cost prohibitive. NR found a local company, Mouldex Mouldings, who creates custom mouldings from EPS foam core. This allowed for a much less heavy moulding, which was more cost effective and easier to install.

The custom ombre wallpaper and mirror required the most trial and error in the project. We developed the PNG file with the wallpaper company (Metro Wallcovering), who produced a number of samples which we eventually approved based on texture and colouration. The digital file then went to the mirror company (Accura Glass) who took the digital file to produce the custom ombre mirror which is the ombre film sandwiched between a low iron glass front, and mirror back panel. The mirror panels were then produced and cut to site verified measurements in order to fit perfectly into the stainless steel archways.

Realization Technology:
Google Sketchup for 3D rendering
Design Challenge: The challenges faced in this project were less to do with the creative and research portion but rather that we were executing the design during COVID. Construction delays due to additional health implementations/restrictions, lockdowns, increased importation lead-times and construction material shortages led to many challenges that the team had to adapt to on a daily basis. Coordination between consultants also proved to be more challenging as all coordination moved to be digital and online.
Research: Type of Research: precedents research of designed barber shops around the world
Research Objectives: aesthetics, layout/planning, functional requirements, lighting requirements
Methodology: N/A
Data Collection & Research Tools Used: Primary research - the client’s other barber shop location; secondary research: online articles and image search (Google and Pinterest)
Participants of Experiments: the client and partners of his other Barber Shop
Results: using stereotypical visual cues of a traditional barber shop (heavy moulding, barber shop pole stripes, etc) and applying it in a new way. Also, creating a completely unique, surrealistic, and experiential space to draw in foot traffic and new clientele
Insights and Impacts:
Effects of the Research in Real-Life Phenomena (such as Business, Society and Design): TBD (as we’re still in lockdown, the effects of our research will be determined once the Barber SHop is open and operational)
Inspiration: Spilling directly onto Toronto’s Dundas Square, this unique and highly coveted location was acquired by our client to build the dream barbershop he always imagined of having since the beginning of his career.

The client was particularly drawn towards a more classic barber shop with heavy molding and historical renovated projects. Because the site didn’t allow for traditional applications of molding, NR was challenged to reimagine the molding design on the ceiling and upper dado in the main space rather than the walls. The client also wanted a memorable flooring design that could be seen from across Dundas Square. Using the mirror columns as a base-point, a radial pattern was created as a reference to the classic barber pole stripes.
Project Duration: Q1-Q4 2020 (extended project duration due to COVID); location: Dundas Square, Toronto, Canada
Operation Flow: *see project description about traditional vs DSB’s station positioning - static vs dynamic environment*
Patents: Copyrights: NIVEK REMAS, 2020.
Team Members: Kevin Chan
Samer Shaath
Image Credits: (Photographer Scott Norsworthy, NR-Dundas Square Barbers, 2020)